Views: 120 Author: Site Editor Publish Time: 2022-01-07 Origin: Site
Glass doors, as the name suggests, are doors made of glass, but compared to other glass products, the strength, thickness, and hardness of glass doors are relatively high, and they already have the functions of ordinary solid wood doors. At the same time, because the main body of the glass door is transparent, it divides the space while visually sharing the space, which is especially suitable for small-sized home decoration space. So what I'm going to talk about today is the glass door installation method and precaution sharing of home decoration experience, let's take a look.
Everything needs to be prepared, and the installation of glass doors is no exception. Before installing the glass door, it is necessary to ensure that the ground construction in the house has been completed, and other decorative decorations such as door covers and thresholds must also be completed. At this time, pay attention to reserve a certain thickness slot for the installation of the glass door. The chamfering of the four sides of the door must be smoothed with sand blocks and other tools to prevent chipping. The wooden base of the stainless steel finish of the door frame needs to be fixed on the ground with corresponding special tools. Then use ** glue to stick the stainless steel veneer on the wooden square to ensure firmness.
Installation and construction of glass doors
During the installation and construction of the glass door, we must emphasize the professional installation method, and follow the steps on the glass door installation drawing. **The glass should be sucked tightly with a glass suction cup with higher pressure, and then the glass should be lifted by holding the suction cup. At this time, it should be noted that the thick glass decoration materials used for glass doors are often heavy and cannot be lifted by one person. Three or more people are required to operate at the same time. After lifting the glass, fix it in the slot reserved at the top of the door frame, and then slowly place the bottom on the bottom bracket, and then make the four sides of the glass coincide with the door frame according to the surrounding installation positions.
Precautions for glass doors
There are many precautions when installing glass doors, such as the method of sealing with glass glue. **We need to open the glass glue and load it into the corresponding injection gun. After setting the corresponding operation, hold the injection gun body with the other hand and hold the glue pressing handle, so squeeze a small amount of glass glue and place it Just align the gap of the corresponding inlaid glass door, and grasp the amount of injection well, not too much, not too little.
There is often more than one glass door, so pay attention to the butt joints between the glass doors. When installing two or more glass plates indoors, a gap of 2-3 mm needs to be reserved for chamfering. After the connected glass plates are positioned and fixed, the glass glue needs to be injected into the corresponding gap. The injection of the glass glue is the same as before. After the glass glue is filled, it is necessary to select a plastic piece of appropriate size and rub it back and forth on both sides of the glass plate, scrape the excess glass glue on the glass plate, and then wipe off the offset printing with a clean rag, so that the glass can be retained to the greatest extent The beauty of the door.
The above is the glass door installation method and precaution sharing of home decoration experience. It includes the preparation work before the installation of the glass door, the construction method of the glass door, and some matters needing attention in the installation of the glass door. In short, the glass door seems simple, it seems that it is just a splicing work between several pieces of glass, but in actual operation, it will still encounter a lot of trouble. If you are arranging the glass door in your home, the editor recommends that you also need to be cautious and follow every step to prevent its service life from being too short.
